ASCO Power Manual Transfer Switches
ASCO Manual Transfer Switches for Commercial & Industrial Facilities in California
Manual transfer switches (MTS) from ASCO Power enable facilities to manually alternate between grid power and portable generators. This solution is suitable for commercial, municipal, agricultural, and mission-critical infrastructure. Leddy Power Systems is a California-based authorized ASCO Power dealer and commercial power systems integrator providing specification, design, sales, and ongoing service for ASCO manual transfer switches.
What Is an ASCO Manual Transfer Switch?
An ASCO Power manual transfer switch (MTS) is a UL 1008-listed power transfer device that allows facility operators to manually switch electrical loads between utility power and a backup generator source. These switches are commonly used in commercial and industrial applications where automatic switching is not required, but portable power generators are utilized as a backup power source.
ASCO Power Manual Transfer Switches options include:
- Amperage ranges from 100A to 4000A
- Voltage classes: 208V, 240V, 480V, 600V
- 3-phase and single-phase configurations
- UL 1008 listed transfer equipment
- NEMA 1, 3R, and 4X enclosure options
- Service entrance rated models available
- High fault current withstand and closing ratings
- Mechanically interlocked switching mechanisms
ASCO Power Manual Transfer Switches provide safe, code-compliant isolation between power sources while giving facilities full operational control during outages or planned generator use.
When Is Manual Transfer the Right Choice?
Manual transfer equipment is appropriate when:
- A facility has on-site trained personnel to set up and connect portable generators
- Immediate automatic switching is not life-safety critical
- Budget constraints favor mechanical reliability over automation
- Generator use is primarily for planned outages
- Mission critical sites requiring redundant systems, i.e. backup to the backup.
Manual transfer switches are a cost-effective choice for smaller commercial buildings and non-life-safety applications. While automatic transfer switches are needed for hospitals, data centers, and emergency lighting, other facilities can use portable generators with manual transfer switches for reliable load transfer at a lower installation cost.
Code & Compliance Considerations
In commercial environments, electrical power transfer equipment must comply with:
- UL 1008 listing requirements
- NEC Articles 700, 701, and 702
- California Electrical Code (CEC) alignment
- Service entrance rating, where applicable
- Seismic anchoring requirements for critical facilities
- Utility coordination standards
When Public Safety Power Shutoff (PSPS) events occur in California, easy-to-install and user-friendly manual transfer equipment is crucial for keeping facilities operational. In wildfire-prone regions, municipal pump stations, agricultural irrigation systems, and water treatment plants rely on manual transfer systems to maintain power during grid disruptions.
Integration With Commercial Generator Systems
Manual transfer switches integrate directly with standby and prime generator systems.
They are commonly paired with:

Commercial generator installation projects

Industrial commercial engine generator systems

Backup generator services

Load bank testing programs

Remote monitoring upgrades
Manual transfer switches work efficiently with generator controls and electrical distribution systems, matching the performance of automatic switches when installed by a licensed contractor. Proper installation requires integrating fault current analysis and breaker coordination with the manual equipment. Contact the Leddy Power Sales Team for specification and purchasing support.
Maintenance & Lifecycle Considerations
Manually operated transfer switches have relatively simple and straightforward designs that have fewer electronic components than their automatic counterparts. Less upkeep is needed, but these manual switches still require regular inspection.
Recommended maintenance includes:

Mechanical linkage inspection

Contact wear evaluation

Torque verification

Infrared thermography

Periodic operational exercise

Load bank testing coordination
Regular service inspections and proper maintenance of transfer switches and mobile generators are essential to ensure your backup power system will be ready for the next outage.

Key Features of the ASCO 7000 Series
ASCO Power manual transfer switches are commonly installed in:
- Municipal pump stations
- Agricultural irrigation operations
- Commercial manufacturing facilities
- Telecommunication sites
- Schools and district buildings
- Water and wastewater treatment sites
- Disaster Shelter Centers
Trust in Leddy Power for manual transfer switches and mobile generators that provide reliable emergency backup power.
- Full-Service Expert Installation
- Genuine ASCO Manual Transfer Switches
- Preventative Maintenance Programs
- 2-Year/ 2,000-Hr Standby Warranty
- 24/7 Emergency Service Support
Our Blog
Running a Job Site in California? The HRFW 325-400 Is Why Serious Contractors Stop Worrying About the Generator
When a job site in California goes dark, everything stops. Cranes idle, compressors cut out, and the clock on your contract keeps running. Whether you’re managing a construction project in the Central Valley, powering a film production in the Mojave, or keeping a...
Tips to Help You Choose The Perfect Standby Generator for Your Home Needs
Power outages are an inconvenience for most households — but for some, they are a genuine emergency. Whether you rely on electrically powered medical equipment, work from home and cannot afford an unexpected loss of connectivity, or simply want to protect your home...
Reasons Behind Your Spark-Ignited Generator Failing to Start From Moorpark Experts
If your backup system refuses to fire up when you need it most, you’re likely searching for answers about a spark-ignited generator failing to start in Moorpark. Whether it’s a residential standby unit or a commercial backup system, a no-start condition can quickly...
GET IN TOUCH
Call us at (805) 552-4221 or Contact Us







