Moisture can be a major problem for switchgears, as it can lead to electrical malfunctions and even fires. A switchgear is an essential component of a generator. It serves two main functions: The switchgear helps to switch the power supply for generators on and off, as well as protect the generator from overloads and short circuits.
Switchgears can be either manual or automatic, depending on the type of generator being used. Manual switchgears require operators to physically turn a switch that will turn off and on electrical systems, whereas an automatic switchgear operates much like a circuit breaker, automatically opening and closing depending upon the electric load it senses.
Both switchgears are important for ensuring safety in any generator system, as they provide protection against electric shocks and fires while also increasing the life of expensive components within the system itself. In order to prevent the formation of moisture on switchgears, there are several measures that can be taken. Let's take a closer look below.
One of the most effective ways to prevent moisture on switchgears is to ensure that the equipment is properly sealed. This can be done by using gaskets or other types of seals to prevent moisture from entering the equipment. In addition, it is important to regularly check and maintain the seals to ensure that they are in good condition. Leddy Power Systems can help you do that, so give us a call to discuss any concerns you may have.
Another effective measure is to keep the switchgears in a dry, well-ventilated area. This will help to prevent moisture from accumulating on the equipment. It can also be a good idea to use a dehumidifier in the area where the switchgears are located, as this can help to remove moisture from the air. Sealing and preventing moisture includes ventilating the area, preferably in an outdoor environment. It's important to maintain all avenues of moisture prevention so there are rarely, if ever, any problems for your business, home, or event when using a generator.
Another way to prevent moisture on switchgears is to avoid exposing the equipment to sources of moisture. This means keeping the equipment away from water sources, such as leaks or floods, and ensuring that it is not located in areas with high humidity. You can easily raise the generator on a secure cement platform so it is higher than ground level. This will help if you are in a flood prone area.
In addition, it is important to regularly clean and maintain the switchgears. This can help to remove any dust or debris that could potentially trap moisture on the equipment. It is also a good idea to use a dry cloth to wipe down the equipment on a regular basis.
Having inspections of your equipment will also identify dried out or brittle seals that could potentially allow moisture to sneak in between the cracks.
One of the most effective ways to prevent moisture on switchgears is to use a protective coating. This can be applied to the equipment to create a barrier that prevents moisture from coming into contact with the switchgears. There are several different types of protective coatings available, and it is important to choose the right one for the specific type of switchgears in use. Our experts at Leddy Power Systems are happy to chat with you about the various ways available to protect your switchgears and equipment. Give us a call, as we are happy to talk to you about any of your concerns and point you in the right direction for assistance and resolution to your generator problems.
Overall, the key to preventing moisture on switchgears is to take a proactive approach. This means regularly checking and maintaining the equipment, keeping it in a dry and well-ventilated area, avoiding sources of moisture, and using protective coatings as needed. By following these steps, it is possible to significantly reduce the risk of moisture-related problems with switchgears. Visit us or call to speak with our experts in LA County, including Santa Barbara County and Ventura County as well!